Meet the citrus friends — small, bright, and full of charm. These little companions remind us that even the simplest things can feel joyful and playful, bringing a pop of color, curiosity, and warmth wherever they land. Sometimes all you need is a bit of citrus cheer to make the day better.

Painted 3MF included. Please double-check that the settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results

Tested the dragon and turtle to 80% - Crate printed at 100%

You will need to glue the crate together. Just dry fit first, so you have them lined up.

Printing Recommendations: Initial layer and initial fill: 25 mm/s Layer Height: 0.20 mm Walls: 3 Infill: 15% - Grid, Gryroid, or HoneyComb Supports: No Supports Needed Cooling: Let the plate cool completely before removing your print to avoid warping or damage. Printer Acceleration: Slow down printer acceleration for smoother results. Printing the outer walls at half speed helps create a nice, clean finish.

Looking for more designs? 🛍️ Browse the full collection in the Rebel Alicorn MMF Store

⚠️ Important – Please Read: All Rebel Alicorn Designs are protected under Copyright Law. Your purchase grants you the right to download and print the design for personal use only. You do not have permission to: Resell, Remix, Alter, or Redistribute the digital files in any form No design modifications are allowed. Except for keyring holes and straw holes, other changes must be approved. Selling physical prints of any Rebel Alicorn design requires authorization. To become an authorized seller, you must join the “Merchant Tier” on Patreon, Thangs, or MMF.

⚠️ Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard. Not recommended for children under age 5.